A successful company is characterized by not only looking inwards, but also by taking responsibility for its environment. Environmental protection and resource conservation have therefore been firmly anchored in our company for over 30 years. In recent years, we have done much to conserve resources, adhere to statutory and other regulations relating to the environment, and minimize damage to the environment.
We plan, monitor, and evaluate our processes with regard to their environmental relevance. As early as 1999 we were able to obtain the DIN EN ISO 14001 certification. Even 2 years after the publication of the energy management standard DIN EN ISO 50001 in 2013 we have applied for and obtained certification. These are an essential part of our business activities along with the quality management system.
Find out more about the 14001 and 50001 certificates.
All of us – the management and employees of JUMO GmbH & Co. KG – have for many years been aware of our responsibility to protect people and the environment. This applies to our private surroundings as well as within our company.
Ensuring that energy-efficient JUMO products also use little energy in their manufacture is an important contribution to climate protection and the conservation of natural resources. For this reason, we have consistently installed a system in recent years to monitor our energy consumption within the company and to improve the energy efficiency of our processes.
The amount of energy used by JUMO in the manufacture of our products is so low that in 2020 we decided to replace the energy management system according to DIN EN ISO 50001 with an energy audit according to DIN EN 16247. We will carry out an energy audit in accordance with the deadline of May 28, 2024. Until then the last certificate of the surveillance audit of the energy management system is considered a fictitious energy audit according to the statements of the German Federal Office of Economics and Export Control (BAFA).
JUMO uses solar energy with its own photovoltaic system.
As a founding member of the Hesse Environmental Alliance, JUMO is also involved in the dialog between business and the administration level to make operational environmental protection as efficient as possible. Like the Environmental Alliance, JUMO pursues 6 main objectives:
• Creating an attractive framework for Hesse as a business location
• Strengthening the personal responsibility of Hessian companies
• Ensuring a high environmental standard for the federal state
• Reducing environmental legislation to the necessary level
• Aligning environmental policy in a cooperative and sustainable fashion
• Supporting environmental and climate protection in local communities
The wonderful Rhön region right at our doorstep: this we want to preserve and we want to preserve it worldwide!
Nowadays, sustainable operations are indispensable. The Hesse sustainability strategy has given the German state of Hesse an established platform on which different groups of society such as companies, municipalities, and schools can collaborate.
Among other aspects, the aim is to get at least 100 companies to commit to greater climate protection and present their activities and plans for CO2 reduction in an action plan. For nearly 12 years, JUMO has documented its commitment to environmental protection with its management system according to DIN EN ISO 14001.
It was therefore only logical for JUMO to also sign the charter for climate protection in order to demonstrate that JUMO will continue to give high priority to the conservation of resources and thus protection of the climate.
JUMO manufactures devices that are used in the production of food. Of course we are aware of the responsibility that absolute safety and hygiene must prevail here. It therefore goes without saying that our products comply with the highest standards and regulations of food law.
Our daily bread: JUMO equipment helps with production.
People do not live from bread alone: JUMO products ensure the hygienic production and filling of beverages.
Our products comply with the following legal regulations:
The materials used in our products are suitable for food contact. The materials are manufactured in accordance with "good manufacturing practice" so that, when used properly, they do not transfer any parts to food.
Since 1999 JUMO has committed itself to environmental protection through the certification in accordance with DIN EN ISO 14001. Beyond the legal requirements, JUMO undertakes numerous activities – particularly in the area of development and production – to avoid the use of hazardous substances in our products as well as in their manufacturing and to conserve finite resources.
The EU Directive 2011/65/EU (RoHS II), which came into force in June 2011 and was implemented in Germany by the Regulation on Materials for Electrical and Electronic Equipment, divides electrical and electronic equipment into various categories. JUMO's product range was previously defined in Group 9 "Industrial Monitoring and Control Devices" and was excluded from the RoHS Directive.
Since July 22, 2017 this exception has ceased to apply without a replacement. All products are now fully covered by the applicable RoHS directives and are legally RoHS compliant.
Large parts of the product range also include a CE identification marking. However, despite RoHS conformity, the sensors, for example, do not fulfill the requirements for a CE identification marking in accordance with an EU declaration of conformity since they are components.
Upon request, we will also be happy to confirm on a product-related basis that the devices in question comply with the RoHS directives and, if applicable, with the EU declaration of conformity.
In the continuation of our commitment to environmental protection based on the certification according to DIN EN ISO 14001 from 1999, we have taken all necessary internal precautions to comply with the new regulations of China RoHS as of July 1, 2016. This includes the corresponding identification markings and the placement of the pollutant table on our website.
JUMO defines its entire product range as the supply of components to the customer for further use and processing in various systems. In this sense, the labeling of the products according to China RoHS is not mandatory, but a pollutant table always is.
As in the past, you can find the respective operating manuals, data sheets, and approvals in the product groups on our website. Here, the classification of the identification marking "e" or "20" as well as the associated pollutant table according to China RoHS can be found. The date of manufacture (year) can be found on the nameplate or in the accompanying documents.
REACH was introduced on June 1, 2007 as a new pan-European law on chemicals. This makes manufacturers and importers of chemicals responsible for the safe handling of their substances. However, this agreement also applies to downstream users.
We are a manufacturer of devices in the field of measurement and control technology and are therefore not affected by REACH in terms of registering our products. We do not manufacture chemical substances and, based on current knowledge, we also do not import these substances from non-EU countries.
We have clarified with our suppliers the extent to which we, as a user of hazardous substances in our production processes, are involved in the registration process according to REACH. We have received confirmation that the relevant substances have been registered. As the REACH candidate list is now reviewed on an annual basis, we will confirm our compliance with REACH upon request.
If substances listed in the current REACH Regulation (SVHC – Substances of Very High Concern) are present in our products at a level that is above the permissible limit values, our customers will be immediately informed – according to Article 33 of the EU Chemicals Regulation 1907/2006.
In June 2018 lead-metal was added to the REACH candidate list. Article 33 of REACH Regulation EG 1907/2006 stipulates an obligation to inform. The potentially toxic properties of lead as a chemical element are known and taken into account in the industry, including health and safety legislation.
Information on REACH Regulation SVHC lead metal EG 1907/2006
Under the Dodd-Frank Wall Street Reform and Consumer Protection Act adopted by the SEC (U.S. Securities and Exchange Commission) – according to which all companies listed on U.S. stock exchanges are required to disclose the origin of "conflict minerals" (including tin, tantalum, tungsten, and gold) from the areas in and around DR Congo/Africa – JUMO is involved in complying with all applicable legal provisions and regulations as a supplier to various U.S. companies.
JUMO mostly produces devices for measurement and control technology. In 2005 our products were rated by ear as control and monitoring devices for commercial use (b2b).
As a packaging manufacturer subject to system participation, JUMO complies with the requirements of the Packaging Act §9, which has been in force since January 01, 2019. This includes the obligation to register with the "Zentralen Stelle Verpackungsregister – ZSVR" (Central Packaging Register) as well as the participation in one of the dual systems in Germany.
ZSVR registration number JUMO: DE 1913076530788
We will gladly take back JUMO packaging and recycle it. The costs incurred for shipping are to be borne by the sender.
In accordance with Directive 2012/19/EU on Waste from Electrical and Electronic Equipment, JUMO offers the option of returning waste equipment. We expressly point out that, in accordance with Directive 2012/19/EU on Waste from Electrical and Electronic Equipment, programs and data stored on the devices must be deleted beforehand for data protection reasons.
Please register the return of waste equipment by e-mail: firstname.lastname@example.org. The transport costs of the return shipment shall be borne by the sender.